Smart Glass & Switchable Privacy Glass in New York
Instant privacy for offices, residences, hotels, healthcare and architectural spaces throughout New York.
- PDLC, PNLC Reverse & DLC technologies
- Smart glass and retrofit smart film
- Professional installation available in New York
- UL listed and SGCC certified products
Switchable glass
Clear when you want the view. Private when you press the switch
A liquid-crystal film, laminated inside a new glass panel or applied to glass that is already in the building. Energised, it is clear. Switched off, it turns opaque white, and the room behind it is gone. The change takes under 200 milliseconds one way and under 10 the other, and a panel held clear draws under 0.5 W per square foot.
It replaces blinds, frosted film and the second wall you were going to build for a meeting room. PriWatt manufactures it in Pompano Beach, Florida, and has since 2016.
Budget
What it costs, per square foot
These are the ranges PriWatt works within. Where a project lands inside them depends on panel size, quantity and how the glass is switched; the number that matters is the one on the quote, and the quote comes from the opening sizes. Hardware, wiring and installation are priced with the project.
| Film, applied to existing glass | Per sq ft |
|---|---|
| PDLC film — frosted unpowered | $65 – $75 |
| PNLC reverse film — clear unpowered | $78 – $110 |
| DLC film — tinted to dark | $65 – $120 |
| Laminated glass, new or replacement | Per sq ft |
|---|---|
| PDLC laminated glass | $78 – $115 |
| PNLC reverse laminated glass | $120 – $165 |
| DLC laminated glass | $70 – $120 |
| PDLC insulated unit (IGU), exterior | $140 – $230 |
Where a project lands inside these ranges is worked out from the opening sizes, and comes back with the quote.
Proof
Certified, listed, and made here
Three things you can verify before you send a drawing.
Certified safety glazing
The laminated products carry SGCC 9894, tested to ANSI Z97.1 and 16 CFR 1201. That is what a door, a shower enclosure or a railing needs before an inspector signs it off.
UL listed
UL file E514182. The electrical side — transformers, controllers and the film as a load — is listed, which is what an electrical engineer asks for first.
Manufactured in Pompano Beach, Florida
Laminated, wired, assembled and tested in Florida: made in the USA from domestic and imported components. A panel that needs adjusting is remade here, not re-imported.
The certificates and test reports are sent with the quote, on request.
New York
Made in Florida, delivered to New York
The glass is made in one place and shipped crated to the site. What differs from a local supplier is the distance, and who stands on site.
Shipped crated from Florida
Panels ship crated from the plant in Pompano Beach to the site. Lead time for switchable glass is 30 days. Send the opening sizes and the project address and the quote comes back with the delivery date.
Installed through PriWatt’s partners
Survey, shop drawings and installation are handled through PriWatt’s installation partners, and the wiring is drawn before anyone is on a ladder.
Common questions
Film goes onto glass that is already in the building and is the faster, cheaper route for a retrofit. Laminated glass is a new panel with the switchable layer sealed inside it, and it is what a door, a shower, a railing or anything the code calls a hazardous location needs. If the glass is staying, film; if it is being replaced anyway, glass.
No. In normal mode the unpowered state is the private one and draws nothing; in reverse mode the unpowered state is clear. Power is used only to hold the other state, at under 0.5 W per square foot.
Under 200 milliseconds to clear and under 10 milliseconds to private — faster than a blind, and with nothing moving.
Yes, as an insulated unit or as DLC glass, which tints to dark rather than frosting white and is specified where solar gain matters as much as privacy. Interior film is not an exterior product.
Lead time for switchable glass is 30 days. It is a schedule rather than an estimate, because the plant is in Florida and the panel is made, wired and tested on one line. Film applied to existing glass is quoted with the project.
The opening sizes, how many panels, whether the glass is already in the building, how you want it switched, and which state the room should hold when the power is off. That is enough for a price and a lead time.
Send the opening, and we price it for New York
Sizes, quantities, and whether the glass is staying or being replaced. The quote comes back with the transformer, the control and the delivery date — not a price per square foot. Or call: (833) 333-8556.