Contact
The plant, and the people who answer
PriWatt manufactures switchable glass and film in South Florida. Lamination, electrical assembly and testing happen in one building, so a technical question gets a technical answer and not a promise to find out.
The quickest way to reach one of them is the calendar: twenty minutes at a time you pick, instead of an exchange about when. Everything below reaches the same team.
2530 N Powerline Rd, Unit 401, Pompano Beach, FL 33069
(833) 333-8556 · sales@priwatt.us
The fastest route, by what you need
These are quicker only because they ask the right questions the first time. The form at the bottom of the page covers anything that is not on the list.
| If you want | Go here |
|---|---|
| To talk it through | The booking calendar. Pick a time instead of asking for one, and a confirmation and a calendar invitation arrive straight away |
| A price for a project | The quote form. Send sizes or drawings and it comes back as a panel schedule, a transformer and a lead time |
| Certificates, test reports or CAD | The document requestthirteen documents, sent to the address you give as attachments |
| To sell or install it | The partner programmefour tracks, because an installer and an architect ask different first questions |
| To register a warranty | The warranty registration form |
| Press, or anything else | This page |
Book a call
Twenty minutes with a project specialist, at a time you choose.
Request a quote
Dimensions or drawings, and what the room is for.
Request the documents
UL, SGCC, the fire reports, the CSI specification and four CAD details.
Become a partner
Installers, window manufacturers, glass fabricators, architects.
What to put in the first message
None of it is required. Each one removes a day from the exchange, because it is what we would otherwise have to ask.
- Sizes, or a drawing; a marked-up photograph is enough to start
- Whether the glass is already in the building, or is still to be made
- Which state it should hold with no power: clear, or private
- Where it is: a partition, a door, a window, a wet room, a guard, overhead
- When it is needed on site
The third line decides the product, and it is easier to answer as a behaviour than as a name. Reverse mode is clear with no power; normal mode is private. Everything else follows from that, and the measured values are published if you would rather read them first.
Some of it may not need us at all: how long it lasts, what happens in a power cut, whether film goes onto glass already in the building, how it is cleaned and what a failure looks like are all answered on the FAQ.