01Apply
Company, location, what you build or install, and the projects you are seeing.
Partner program
Build with switchable glass, manufactured in the USA
PriWatt manufactures PDLC, PNLC and DLC switchable glass and self-adhesive film in Pompano Beach, and delivers projects across the United States and Canada through partners. If you install glass, build windows, fabricate insulating units or specify glazing, there is a way to work with us.
The quickest start is a call: twenty minutes with a project specialist, at a time you pick, covering what you build and where switchable glass fits it. Or apply below and a specialist answers within a day.
Manufactured in the USA · UL Recognized Components · SGCC Safety Glazing · Custom fabrication
Who we work with
Four ways to work with PriWatt
The product reaches a building through the people who already work on it. Whichever of these you are, the application is the same form and the first conversation is technical.
Installers and glaziers
Take on switchable work in your city. We train your team, supply the glass or the film with shop drawings and the low-voltage detail, and you install it. Certified installation partners are the first call for projects in their area.
Read more
Window and door manufacturers
Offer a switchable option inside your own line. Laminated PNLC, PDLC or DLC units are built to your sizes: up to 143 in tall and 72 in wide, any shape, with the holes, notches and cut-outs your hardware needs. They come with the transformer and control that drive them. Manufactured in the USA, so the schedule is short enough to sit inside your own.
Read more
Glass and IGU fabricators
Add a switchable layer to what you already build. Laminated switchable panels go into insulating units, and PriWatt’s patented busbar anchoring keeps the electrical connection at the edge reliable where the lamination is under load.
Read more
Architects and designers
Specify it with the numbers in front of you. Samples in hand, a technical consultation for qualified projects, a technical review and shop drawings before anything is made, and a US manufacturer to call when the detail is unusual.
Read moreWhat you get
A manufacturer behind the project
Made where it is engineered
Lamination, electrical assembly and testing under one roof in Pompano Beach, Florida, since 2016 — not a reseller of imported panels.
Built to the opening
Custom sizes to 143 in tall and up to 72 in wide by product, any shape, curved glass, holes, notches and cut-outs. Glass for new work and replacement; film for glass already in the building.
Certified components
UL Recognized Components and SGCC safety-glazing certification, with the patented busbar anchoring that keeps the connection under lamination load.
Power and control included
Isolation transformers sized to the run, and five ways to switch a panel: wall switch, touch panel, app, remote, or the building’s automation system.
Engineering before production
Every project starts with a technical review and shop drawings, so the panel that arrives is the panel the opening was measured for.
Training for your team
Installation partners are trained and certified on the product before the first job — how the film and glass are handled, wired and commissioned.
Short lead times
The glass is laminated and assembled in the USA rather than shipped in from overseas, which is what keeps a switchable panel off a project’s critical path.
Samples to show
Samples and technical consultation for qualified projects, so a client can switch the glass in their own hands before they commit to it.
Your own ordering portal
Partners order and track work through the PriWatt portal rather than by email thread.
How it starts
From application to first project
A PriWatt project specialist or an authorized partner replies within 24 hours.
01
02Technical call
Which products fit your work, how they are powered and switched, what we need from you.
03Samples and specifications
Samples and technical consultation for qualified projects, so you can show the glass switching.
04First project
Technical review, shop drawings, production in the USA, delivery — with support on the detail.
PDLC installation
Who fits it, and who looks after it
PriWatt manufactures the glass and the film. Smart Glass Technologies (smartglasstech.us) is the partner for PDLC installation, and for the service that follows it.
The two halves are quoted and drawn together, which is the point of naming one partner rather than leaving the site work to be arranged afterwards.
What PriWatt supplies
The panel, made to the opening, with the isolation transformer and the control sized to the run — and a shop drawing that says where the tail leaves each panel.
What the partner covers
The PDLC work on site: film applied to the existing glazing or laminated panels glazed in, the low-voltage connections, and every panel switched and checked before handover.
Why it is one conversation
The wiring route is agreed before the glass is made. Left until after delivery, it is the detail that turns a switchable project into an expensive fixed one.
Supplying and installing on the same project? Say so on the quotation form and the enquiry reaches both sides at once. The four partner tracks above stay open either way: a glazier who installs its own work applies through installers and glaziers.
Questions partners ask
Before you apply
Either. We work through certified installation partners, and we also supply directly to a contractor or glazing team who install it themselves.
Switchable glass is for new construction and glass replacement. Self-adhesive film goes onto glass already in the building, so it suits a retrofit where the glazing stays.
Yes. Samples and technical consultations are available for qualified projects.
Yes. Installation partners are trained and certified on handling, wiring and commissioning before the first project, and technical support stays available after it.
Per project: size, configuration and scope decide it. Send the drawings or the dimensions and you get a quotation rather than a price list.
Lead times are short: the glass is manufactured in the USA, not shipped in finished from overseas. The schedule is set from the technical review and shop drawings that begin every project, and depends on the specification and the size of the job.
Projects are delivered across the United States and Canada. Tell us the region you cover when you apply.
Become a PriWatt Partner
The form takes a couple of minutes: who you are, where you work and what you do. A specialist replies within 24 hours — and the first conversation is technical, not a price list.
Would rather talk first? Book a technical call at a time that suits you, ring (833) 333-8556, or send a message.